Hook balance overload of the disadvantage
You know the hook scale can move a lot of volume for us, but it is also limited. If it exceeds its rated power, it will become an overloading state. What's the harm? Xingtai dehong electronics co., LTD. Is organized as follows:
Increase operational risk
Originally for the use of hook scales, there is a certain risk factor. However, if the operation can be carried out strictly according to regulations, it can guarantee the safety in the operation process. However, in the case of overload weighing, it may lead to an increase in the risk factor, which may lead to a dangerous accident in the operation process. In general, overuse will cause damage to its hooks, which will lead to the accidental fall of the weighed goods. After all, for such a weighing tool, the items that are weighed tend to be heavier. Therefore, it is necessary to avoid overloading, so as to avoid the increase of risk factor.
Internal parts were damaged
Overload weighing not only increases the risk of accidents, but also causes damage to the tools' internal parts. In the process of overloading and weighing, the pressure of its parts increases beyond its capacity, resulting in damage. In such cases, it is necessary to replace the parts, resulting in unnecessary expenditure. Weigh in strict accordance with the regulations, do not exceed the maximum value of the weighing, it can certainly reduce the damage to parts, so that the use life of weighing tools can achieve the longest effect.
Affects the performance of weighing tools
If the hook scale is overused for a long time, it will affect the performance of the tool. From a professional perspective, such tools are relatively stable in weighing performance and can ensure the accuracy of weighing. However, if overloading is used, its performance will be affected, resulting in failure of performance, failure of accurate weight data display, and greatly reduced overall performance. For weighing tools, once there is imprecision, it will lose its original value and meaning.
Therefore, when using the machine must take care of the bearing capacity, do not let her bear too much, otherwise things will be turned against you!